Welland EZStor EPC-221 PCIe Dual Port Power Over eSATA RAID Card - Computer Alliance
AJAX Loading

Welland EZStor EPC-221 PCIe Dual Port Power Over eSATA RAID Card

Web ID: 10635

"Power over eSATA (eSATAp)" means that devices taking advantage of this specification no longer require a separate power supply when using eSATA, they draw power for the drive directly from the host system through the Power over eSATA cable/connector connection.
Manufacturer PN: EPC-221
Warranty: 1 Year
Manufacturer Website

 

"Power over eSATA (eSATAp)" means that devices taking advantage of this specification no longer require a separate power supply when using eSATA, they draw power for the drive directly from the host system through the Power over eSATA cable/connector connection. A "Power over eSATA" connector is a hybrid of both eSATA and USB2.0, so that it supports USB A Type/eSATA/eSATAp devices.

The Welland EZSTOR Power over eSATA RAID Pack consists of a RAID PCI Express card with 2 eSATAp ports and 2 eSATAp cables. The eSATAp ports or connectors combine eSATA with +5V and +12V power support, so when connecting to the hard drives, no extra power supply is required. It's a handy eSATA RAID solution for power users who want a high speed eSATA transmission rate. Using different RAID setups such as JBOD, RAID 0/1 or SATA Port Multiplier makes the RAID Pack suitable for high speed data backup or security applications.

 

 

SPECIFICATIONS
Application
 
 
Add-on 2 external Power over eSATA (eSATAp) ports to the PC system
 
PC Interface
PCI Express 1.1 specification, Standard 121mm Bracket
External Port
 
 
 
2 x external Power over eSATA (eSATAp) port
(Compatible with Power over eSATA (eSATAp) / USB A Type / eSATA connector)
Internal Port 1 x IDE (PATA) connector
Bus Power Support 5V / 12V
Data transfer rate USB2.0 up to 480 Mbps ; eSATA up to 3Gbps
SATA Features Fully compliant with SATAI/ II speed
Supports 2-port 3.0Gbps SATA II interface
Supports two independent SATA II channels (separate logic and FIFO)
Supports Native Command Queue (NCQ) on SATA II port
Supports SATA II Gen2i and Gen2m (External SATA Connection, eSATA)
Supports Port Multiplier with Command-based Switching on SATA II port
Supports up to UDMA6 transfer mode of PATA
USB Features Driverless Installation
Data transfer rate can be 1.5/12/480Mbps
Compliant with OHCI Specification for USB Rev 1.0a
Support USB OHCI & UHCI modes
Chains up 127 devices
Support devices hot swap
Easy plug and play installation
RAID Support RAID 0 / 1?JBOD and SATA Port-Multiplier
System Request Windows 2K / Server 2003 / XP / Server 2008 / Vista / 7 , MAC 10.4.6 or later & Linux system
PC with a free PCI Express slot
Motherboard with a free USB pin header
Available 12V power cable (with big 4 pin power plug)
Drive Support
2.5" / 3.5" SATA HDD or 5.25" SATA ODD
Connector Type SATA Male (22 pin) to Power over eSATA (eSATAp) Male
Cable Length 100cm (approximately 39 inches)
Transmission Rate eSATA up to 3Gbps
Min. Hardware Request
Any PC or NB with Power over eSATA ( eSATAp) port
  NB with eSATA p built-in, click here