AJAX Loading

Thermaltake ATX Versa J25 TG RGB Edition Case Black PN CA-1L8-00M1WN-01

Web ID: 24333

Designed for PC builders who want a sleek, custom looking case with great airflow and a crystal clear tempered glass panel the Versa J25 is the ultimate mid-tower. This special RGB version comes with three 120mm 12V RGB front fans that are dual-mode controllable either through the front I/O panels, or by connecting to compatible Asus Gigabyte, MSI, ASRock or Biostar motherboards. The J25 supports a huge range of air and liquid cooling hardware, high-end GPUs and even a handy PSU cover in the basement. ONLY WHILE STOCKS LAST!
Manufacturer Warranty: 1 Year
Manufacturer PN: CA-1L8-00M1WN-01
GTIN: 841163005378
Manufacturer Website

$119 

Tempered Glass Window

The left tempered glass window is designed to slide into place and can be attached firmly with two screws at the rear panel, this 4mm tempered glass panel is more durable and shows much less wear and tear than older acrylic panels. 

Angular, Acrylic Front Panel

The front panel of the Versa J25 has a centre acrylic strip that highlights any RGB fans you build into the system, while the vented grills on either side gives plenty of airflow to your components.


Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED, and BIOSTAR Vivid LED DJ, the included 12V RGB front fans allow you to control the lighting modes through your motherboard software. Visit the support page for motherboard information or to download the software:

 

Download RGB Motherboard Support List


*Caution: the motherboard signal connector only supports 12V header.
 

 


One Button to Easily Access Gorgeous RGB LED Illumination

If you aren’t using a compatible RGB motherboard, the included RGB fans can be controlled using a simple interface built into the I/O panel that cycles through three different lighting modes and a range of different colour options. 




 

Built-in RGB Switch Board

Thanks to the built-in RGB switch board, V200 TG RGB is able to deliver the ultimate RGB lighting customization through the I/O port RGB button or the synchronization with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock RGB LED and BIOSTAR Vivid LED DJ -enabled motherboards.


Handy I/O Ports

The top-front panel features two USB 3.0 data transfer ports to grant easy access when needed.

Built-in PSU Cover

The J25 RGB edition is equipped with a full-length PSU cover with vent hole design to hide those unsightly cables from view and give your build a clean and tidy look.


Tool-Free Installation

The included hard drive bays suit 3.5” and 2.5” bays, the chassis comes with expansion slots above and below the PSU shroud as well as behind the back panel, meaning you have space for up to seven drives. 

3.5” or 2.5” HDD Drive Compatible 

Superior Hardware Support

Build the system of your dreams with support for a tower CPU cooler with a maximum height of 160mm, a dual expansion slot VGA of up to 330mm in length, and a power supply with length of up to 160mm.

*The image is for reference only; three 120mm 12V RGB fans and one standard 120mm fan are included.

Excellent Cooling Capability

The J25 comes with three 12V RGB fans in the front and one standard 120mm exhaust fan but can also support two 120 or 140mm fans at the top. If you prefer liquid cooling, the front panel can house up to a 360mm radiator.

*The image is for reference only; three 120mm 12V RGB fans and one standard 120mm fan are included.


Fan Supporting List

 

Fan Compatibility List
  120 
mm
140 
mm
200 
mm

Front

3 2 -
Top 2 2 -
Rear 1 - -

 

Thermaltake Compatible Fan

 

120 
Series

140 
Series

200 
Series

PURE FAN Series

? ? -
LUNA FAN Series ? ? -
Riing FAN Series ? ? -

 

Radiator Supporting List

 

Radiator Compatibility List
  120mm 240mm 360mm 140mm 280mm 420mm

Front

? ? ? - - -

Top

- - - - - -

Rear

? - - - - -

 

All-in-One Compatibility List 
(Water 3.0 and Floe series)
  120mm 240mm 360mm
Front

?

?

?

?

- -
Top - - - - - -
Rear

?

?

- - - -

 

 

 

Model Versa J25 TG RGB
P/N CA-1L8-00M1WN-01
Case Type Middle tower
Dimension (H x W x D) 461 x 206 x 402 mm
(18.1 x 8.1 x 15.8 inch)
Net Weight 6.2 kg / 13.67 lb
Side Panel 3mm Tempered Glass x1
Color Exterior & Interior : Black
Material SPCC
Cooling System Rear (exhaust) : 
120 x 120 x 25 mm fan 
(1000rpm, 16dBA)
Front (intake) : 
120 x 120 x 25 mm RGB fan x3 (1000rpm, 16dBA)
Drive Bays
-Accessible
-Hidden

2 x 2.5”(HDD Bracket) 
3 x 3.5“ or 2.5” (HDD Tray)
Expansion Slots 7
Motherboards 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX)
I/O Ports USB 3.0 x 2, HD Audio x 1
PSU Standard PS2 PSU (optional)
Fan Support Front: 
3 x 120mm, 2 x 140mm
Top: 
2 x 120mm, 2 x 140mm
Rear: 
1 x 120mm
Radiator Support Front: 
1 x 360mm
Rear: 
1 x 120mm
Clearance CPU cooler height limitation: 160mm
VGA length limitation: 330mm
PSU length limitation: 160mm