StarTech USB 3.0 SATA SATDOCK2REU3 Hard Drive Duplicator & Eraser Dock - Standalone 2.5/3.5in HDD & SSD Eraser and Cloner
Web ID: 18807
Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB 3.0 for easy access - USB 3.0 SATA HDD/SSD Dock- 1:1 Duplicator ONLY WHILE STOCKS LAST!
Manufacturer Warranty: 1 Year
Manufacturer PN: SATDOCK2REU3
The SATDOCK2REU3 USB 3.0 Standalone Duplicator and Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed. The dock also functions as a standalone drive duplicator and eraser – an efficient and versatile solution for external drive management.
Featuring standalone Sector by Sector hard drive duplication with built-in LED progress bar, and support for 2 drive single pass over writing the SATDOCK22EU3 is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing.
With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD/SSD docking station is compatible with virtually any SATA hard drive, and greatly increases the storage/backup capabilities of your computer.
Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock.
The SATDOCK2REU3 is backed by a 2-year StarTech.com warranty and free lifetime technical support.
|Drive Connectors||SATA Data & Power Combo (7+15 pin)|
|Host Connectors||USB Type-B (9 pin) USB 3.0|
|Operating Temperature||0?C to 85?C (32?F to 185?F)|
|Storage Temperature||-10?C to 95?C (14?F to 203?F)|
|Chipset ID||Prolific - PL2775|
|Compatible Drive Types||SATA|
|Drive Size||2.5in & 3.5in|
|Number of Drives||2|
|LED Indicators||HDD1 / 75%|
|HDD2 / 100%|
|Link / 25%|
|Power / 50%|
|Shipping (Package) Weight||710 g [25.1 oz]|
|Max Drive Capacity||Currently tested with up to 4TB 7200 RPM 3.5" hard drives and 1TB 7200 RPM 2.5" hard drives|
|Type and Rate||SATA II (3 Gbps)|
|USB 3.0 - 5 Gbit/s|
|Product Height||62 mm [2.4 in]|
|Product Length||128 mm [5 in]|
|Product Weight||610 g [21.5 oz]|
|Product Width||103 mm [4.1 in]|
|Center Tip Polarity||Positive|
|Input Voltage||110V-240V AC|
|Output Voltage||12 DC|
|Power Consumption (In Watts)||36|
|Power Source||AC Adapter Included|
|OS Compatibility||OS independent; No software or drivers required|
|Special Notes / Requirements|
|Note||Destination drive must be the same size or larger than the source drive|
|What's in the Box|
|Included in Package||HDD Dock|
|Universal power adapter: comes ready for NA/EU/UK only when you buy in NA/EU/UK; comes ready for Australia and New Zealand only when you buy in Australia and New Zealand|
|USB 3.0 Cable|