AJAX Loading

StarTech 3-Port M.2 SSD (NGFF) Adapter Card - 1 x PCIe (NVMe) M.2 2 x SATA III M.2 - PCIe 3.0

Web ID: 19724

Mount both PCIe (NVMe) and SATA based M.2 SSDs inside your computer using this PCI Express adapter card, 3-Port M.2 NGFF SSD Adapter Card, PCIe 3.0 ONLY WHILE STOCKS LAST!
Manufacturer Warranty: 1 Year
Manufacturer PN: PEXM2SAT32N1
GTIN: 65030865708
Manufacturer Website

$106 

This 3-port M.2 SSD adapter card is one of the only cards that supports both PCIe and SATA-based M.2 SSDs (solid-state drives). It?s a versatile way to expand the overall storage capacity of your desktop PC or server. Plus, because it supports a high-speed PCIe M.2 drive, you can increase the speed and performance of your computer.

Increase the storage of your desktop PC

If you need a simple and discreet way to expand your computer?s storage, then this card can help. The card provides a platform for adding up to three M.2 SSDs to virtually any computer that has a PCIe slot. It supports common M.2 SATA SSDs, as well as newer high-performance M.2 PCIe drives. Now, you have a simple and effective way to expand the storage of your computer, regardless of the M.2 drive types you are using.

Optimize your computer?s performance

When you couple this card with a PCI Express based M.2 drive, you can give your computer?s performance a noticeable speed boost. With support for PCI Express 3.0 (up to approximately 40Gbps), you can install the latest high-performance M.2 PCIe SSDs inside your computer. With faster performance, you can get more work done in less time.

Peace of mind, with simple and cost-effective data recovery

Due to their performance and size advantages, M.2 drives are commonly used in laptops. If your laptop has failed, but its M.2 drive is still functional, then this card can help with data recovery. Once the M.2 drive is installed and the data recovery is complete, you can continue to use the drive for storage and backup purposes.

Leverage the size and speed of M.2 drives

This M.2 card lets you take advantage of the size and performance benefits of NGFF M.2 SSDs. M.2 drives are smaller than typical platter drives or mSATA-based SSDs, so you can install them in small form-factor PCs and servers, or in tighter areas within your computer case.

Supports a wide range of drives

You can rest assured that your M.2 SSDs are compatible with the adapter card. It supports the most common drive sizes, including, 2280, 2260, 2242 and 2230.

The PEXM2SAT32N1 is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Connector(s)
Connector Type(s) PCI Express x4 Male
Internal Ports M.2 (NGFF, B-Key) Receptacle
  M.2 (NGFF, M-Key, PCIe x4) Receptacle
  SATA (7 pin, Data) Plug
Environmental
Humidity 20%~80% RH (Non-condensing)
Operating Temperature 5?C to 50?C (41?F to 122?F)
Storage Temperature -25?C to 70?C (-13?F to 158?F)
Hardware
Bus Type PCI Express
Card Type Standard Profile (LP bracket incl.)
Industry Standards PCI Express 3.0
  Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)
Interface M.2 PCIe (NVMe)
  M.2 SATA (NGFF)
  SATA
Port Style Integrated on Card
Ports 3
Indicators
LED Indicators M.2 drive status/activity
  Power
Packaging Information
Shipping (Package) Weight 122 g [4.3 oz]
Performance
ATAPI Support Yes
Bootable Yes
MTBF 50,000 Hours
Port Multiplier No
RAID No
Type and Rate SATA III (6 Gbps)
Physical Characteristics
Product Height 120 mm [4.7 in]
Product Length 120 mm [4.7 in]
Product Weight 46 g [1.6 oz]
Product Width 20 mm [0.8 in]
Software
OS Compatibility OS Independent; No additional drivers or software required

Note: When installed in a compatible operating system, the card is natively supported and doesn?t require any additional drivers or software. However, your operating system must natively support PCIe SSDs (NVMe - Non-Volatile Memory Express).
Special Notes / Requirements
Note The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane.
System and Cable Requirements A computer enabled with PCI Express (PCIe), and an available PCI Express x4, x8, or x16 slot
  An operating system that natively supports PCIe SSDs (NVMe), such as:
- Windows? 7 and later
- Mac OS 10.10.3 and later
  One or two SATA host ports on the host computer (for example, the SATA controllercard, or the motherboard SATA ports inside of your computer)
What's in the Box
Included in Package 3-port M.2 NGFF SSD adapter card
  low-profile bracket
  M.2 mounting nuts
  M.2 mounting screws
  M.2 mounting standoffs
  quick-start guide
  screwdriver