AJAX Loading

Audioengine W3 Wireless Audio Adapter

Web ID: 39415

Finally, you can stream all your music wirelessly from any audio source, app, or device to your powered speakers, stereo receiver, or powered subwoofer. Buh-bye, speaker cables. Hello, wireless audio with CD-like quality stereo sound.
Manufacturer Warranty: 1 Year
Manufacturer PN: 90021935
Manufacturer Website

$199 

audioengine w3 wireless audio adapter

DAC type
Dual mode USB and analog (via CS5343 ADC) wireless DAC

Inputs
USB audio, mini-jack analog

Outputs
analog mini-jack

DAC
CS4344

ADC
CS5343

Full scale output
1.0Vrms

Output impedance
470 ohms

Power source
Sender: USB from computer or adapter
Receiver: USB power adapter

Power requirements
Sender: 180mA, 5V
Receiver: 150mA, 5V

SNR
95dB

THD+N
0.01%

Crosstalk
-65dB

Frequency response
20Hz to 20KHz, +/- .2dB

Input bit depth
up to 16 bits native

Input sample rate
up to 48KHz native

USB device class
type 1.1 or above

Wireless operation range
Up to 100ft (30m) typical

Latency
<20ms

Receivers supported
up to 3

Product dimensions
100x30x10mm (LxWxH)

Shipping weight
1 lb

Included accessories
minijack cable (20″), minijack to RCA adapter (12″), USB power adapter

Environmental
Operating Temperature: 32 to 95 degrees F
Non-operating Temp: -4 to 113 degrees F
Relative Humidity: 5% to 95% non-condensing

Advantages of wireless
The W3 wireless system transmits bit-perfect PCM-stereo simultaneously to up to 3 receivers. Because the USB controller in the Sender and the DAC in the Receiver are segregated by the wireless subsystem, various anomalies which plague many wired DACs such as jitter, grounding, and induced cable noise are greatly reduced. In addition, the W3 allows the user to physically isolate a potentially noisy computer from the sensitive audio components in your system.

W3 USB
The W3 utilizes the TI CC8520 PurePath™ USB wireless system-on-a-chip solutions, TI’s newest offering to the wireless audio arena. The Sender can be powered directly from the USB bus or from the included external power adapter.

W3 DAC
The W3 Receiver utilizes the CS4344 DAC, a solid, well regarded industry mainstay. Due to the CS4344’s’s high signal-to-noise specs, the W3 presents impressive low noise and low distortion characteristics.