700VA APC BE700G-AZ Back-UPS ES - Computer Alliance
AJAX Loading

700VA APC BE700G-AZ Back-UPS ES

Web ID: 16059

APC Power-Saving Back-UPS ES 8 Outlet 700VA 230V AS 3112 ONLY WHILE STOCKS LAST!
Warranty: 2 Year
Manufacturer Website

$175 

BE700G-AZ Features

Battery replacement without tools 
Enables fast battery replacement, lowering Mean Time to Repair (MTTR).
Adjustable voltage sensitivity 
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
Audible alarms 
Provides notification of changing utility power and UPS power conditions
Automatic self-test 
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery-protected and surge-only outlets 
Reserves power capacity and run time for connected equipment that require UPS battery back-up while providing surge only protection for less critical equipment
Cold-start capable 
Provides temporary battery power when the utility power is out.
Dataline surge protection 
Provides protection of connected equipment from power surges on the data lines.
Hot-swappable batteries 
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Battery failure notification 
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Safety-agency approved 
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
USB connectivity 
Provides management of the UPS via a USB port (not available on all models).
User-replaceable batteries 
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Back-UPS Features & Benefits

Protection
Battery and surge protected outlets
Back up and protect your hardware and data during power outages, surges and spikes.
Surge only outlets
Protect secondary electronics from surges and spikes without reducing battery power used to run primary electronics during an outage.
Availability
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Serviceability
Resettable circuit breaker
Easy recovery from overloads; no need to replace a fuse.
Manageability
Audible alarms
Provides notification of changing utility power and UPS power conditions
LED status display
Quickly understand unit and power status with visual indicators.
Safety
Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

 

Output

Output Power Capacity
405 Watts / 700 VA
Max Configurable Power
405 Watts / 700 VA
Nominal Output Voltage
230V
Output Frequency (sync to mains)
47 - 63 Hz
Other Output Voltages
220
Waveform Type
Stepped approximation to a sinewave
Output Connections
(4) Australian (Battery Backup)  
(4) Australian (Surge Protection)  
Output Voltage Tolerance
+/- 5% static and 100% load step

Input

Nominal Input Voltage
230V
Input Frequency
50/60 Hz +/- 5 Hz (auto sensing)
Input Connections
Australian/Chinese  
Cord Length
1.83 meters
Maximum Input Current
10A

Batteries & Runtime

Battery Type
Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time
16 hour(s)
Replacement Battery
Runtime Graph
Hover over the line on the graph above to view the runtime at any desired load
Curve fit to measured runtime data. All measurements taken with new, fully charged batteries, at typical environmental conditions, with no electrical input and balanced resistive load (PF = 1.0) output.
 

Communications & Management

Control panel
LED status display with On Line : On Battery : Replace Battery and Overload indicators

Surge Protection and Filtering

Surge energy rating
310 Joules
Filtering
Full time multi-pole noise filtering : 5% IEEE surge let-through : zero clamping response time : meets UL 1449
Data Line Protection
Analog phone line for phone/fax/modem/DSL (RJ-45 connector), Network line - 10/100 Base-T Ethernet (RJ-45 connector)

Physical

Maximum Height
89.00 mm
Maximum Width
224.00 mm
Maximum Depth
311.00 mm
Net Weight
6.93 KG
Shipping Weight
7.84 KG
Shipping Height
127.00 mm
Shipping Width
279.00 mm
Shipping Depth
400.00 mm
Master Carton Units
1.00
Master Carton Dimensions (Length x Width x Height)
324.00 mm
Master Carton Weight
16.36 KG
SCC Codes
1073130427167 0
Units per Pallet
48.00

Environmental

Operating Environment
0 - 40 °C
Operating Relative Humidity
0 - 95%
Operating Elevation
0-9000 meters
Storage Temperature
-15 - 40 °C
Storage Relative Humidity
0 - 95%
Storage Elevation
0-9000 meters
Audible noise at 1 meter from surface of unit
40.00 dBA

Conformance

Approvals
A-tick, C-tick, CE, TelePermit
Standard warranty
2 years repair or replace

Sustainable Offer Status

RoHS
Compliant
REACH
REACH: Contains No SVHCs
PEP
Available in Documentation tab
EOLI
Available in Documentation tab