|
Micron® 16nm MLC NAND Flash
|
|
RoHS-compliant package
|
|
SATA 6 Gb/s interface
|
|
TCG/Opal 2.0-compliant self-encrypting drive (SED)
|
|
Compatible with Microsoft eDrive®
|
|
Hardware-based AES-256 encryption engine
|
|
ATA modes supported
|
|
PIO mode 3, 4
|
|
Multiword DMA mode 0, 1, 2
|
|
Ultra DMA mode 0, 1, 2, 3, 4, 5, 6
|
|
Industry-standard, 512-byte sector size support
|
|
Device Sleep (DEVSLP), extreme low power mode
|
|
Native command queuing support with 32-command slot support
|
|
ATA-8 ACS3 command set compliant
|
|
ATA security feature command set and password login support
|
|
Secure erase (data page) command set: fast and secure erase
|
|
Sanitize device feature set support
|
|
Self-monitoring, analysis, and reporting technology (SMART) command set
|
|
Dynamic write acceleration
|
|
Adaptive thermal monitoring
|
|
Power loss protection for data-at-rest
|
|
Performance ,
|
|
PCMark® Vantage (HDD test suite score): up to 87,000
|
|
Sequential 128KB READ: up to 560 MB/s
|
|
Sequential 128KB WRITE: up to 510 MB/s
|
|
Random 4KB READ: up to 100,000 IOPS
|
|
Random 4KB WRITE: up to 88,000 IOPS
|
|
READ/WRITE latency: 120µs/30µs (TYP)
|
|
Reliability
|
|
MTTF: 1.5 million device hours3
|
|
Static and dynamic wear leveling
|
|
Uncorrectable bit error rate (UBER): <1 sector per 1015 bits read
|
|
Low power consumption
|
|
150mW TYP4
|
|
Endurance: Total bytes written (TBW)
|
|
Up to 300TB
|
|
Capacity (unformatted): 128GB, 256GB, 512GB
|
|
Mechanical
|
|
M.2 "Socket 2" connector: 3.3V ±5%
|
|
Type 2260: 60mm x 22mm x 3.6mm
|
|
Type 2280: 80mm x 22mm x 2.3mm
|
|
Weight: 10g (MAX)
|
|
Secure firmware update with digitally signed firmware image
|
|
Operating temperature
|
|
Commercial (0°C to +70°C)5
|
Notes
-
Typical I/O performance numbers as measured fresh-out-of-box (FOB) using Iometer with a queue depth of 32 and write cache enabled.
-
4KB transfers used for READ/WRITE latency values.
-
The product achieves a mean time to failure (MTTF) based on population statistics not relevant to individual units.
-
Active average power measured during execution of MobileMark® with DIPM (device-initiated power management) enabled.
-
Temperature measured by SMART attribute 194.
Warranty: Contact your Micron sales representative for further information regarding the product,
including product warranties.
Part Numbering Information
Micron’s M600 SSD is available in different configurations and densities. The chart below is a comprehensive list of options for the M600 series devices; not all options listed can be combined to define an offered product. Visit www.micron.com for a list of valid part numbers.
Figure 1. Part Number Chart
Products and specifications discussed herein are subject to change by Micron without notice. This data sheet contains minimum and maximum limits specified over the power supply and temperature range set forth herein. Although considered final, these specifications are subject to change, as further product development and data characterization sometimes occur.
