Zalman CNPS90F CPU Heatsink and Fan - Computer Alliance
AJAX Loading

Zalman CNPS90F CPU Heatsink and Fan

Web ID: 11568

Zalman CNPS90F CPU Heatsink and Fan, suitable for Intel 1150/1155/1156/775 - AMD FM2/FM1/AM3/AM2+/AM2 CPU's
Manufacturer PN: CNPS90F
GTIN: 823884204261
Warranty: 1 Year
Manufacturer Website

$15SAVE $14
 

Optimized the angle with honeycomb fin, helps to increase the airflow , minimize the noise.

 

Down blowing type design
Through emitting the air straight from the fan to the mother board, 
it cools down not only the CPU but also the components around it..

 
 

One of the Advanced Sleeve bearing FSB Fluid Shield Bearing) applied to prevent 
dust and strong cooling performance with 92mm fan with minimized noise.

 

Shark fin blade helps to reduce the turbulence generated 
while the turning of the fan, which helps to reduce noise 
and vibration, at the same time increases the air flow.

 

60mm high, small enough to mount into LP(Low Profile) case, 
perfect for home theater PC, with weight only 240g.

 

Wide compatibility and easy installation.

 
  Socket CPU CPU Compatibility
Intel 1155/1156 Core i7 Supports all speeds
Core i5
Core i3
1150/1151 Core i7 Supports all speeds
Core i5
775 Core 2 Quad Supports all speeds
Core 2 Duo
Pentium Dual Core
Pentium D
Pentium 4 Prescott 95W or lower
Cedar Mill 95W or lower
Celeron D Supports all speeds
AMD FM1 Llano 95W or lower
FM2 Trinity 95W or lower
AM3+ Vishera 95W or lower
Zambezi 95W or lower
AM3 Phenom II 95W or lower
Athlon II Supports all speeds
AM2+ Phenom 95W or lower
Athlon FX Supports all speeds
Athlon X2
Athlon
Sempron
AM2 Athlon FX Supports all speeds
Athlon X2
Athlon
Sempron
940 Opteron Supports all speeds
Athlon FX
939 Opteron Supports all speeds
Athlon FX
Athlon X2
Athlon
754 Athlon Supports all speeds
Sempron
 
 
 
 
Dimensions 116(L) x 112(W) x 60(H)mm
Weight 240g
Base Material Pure Aluminum
Fan Size 92mm
Bearing Type FSB (Fluid Sheild Bearing)
Fan RPM 2300rpm ±10%
Fan Noise 29dBA
Connecter 3-Pin
? Please useFan Mate 2to change the fan speed.
 
The computer system may automatically shut down when booting the computer after the system monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case, fully turn the Speed Control Knob in the clockwise direction before rebooting to disable the 'CPU Fan Detected' option in BIOS, or set the CPU fan's rotational speed to 1,350rpm or lower in the system monitoring program.
 
  Some motherboards fail to boot if the rotational speed of the CPU fan is below a certain rpm. However, booting can be possible even at low fan rpm if the BIOS settings are updated. For more information on updating the BIOS, please refer to the
website of the motherboard's manufacturer. There are motherboards which fail to detect the rpm while operating the cooler in Silent Mode, but this does not affect computing performance.
 
Excessive force exerted on the fan may damage the fan, resulting in damage to the system.
 
Zalman Tech Co., Ltd. is not responsible for any damages resulting from CPU Overclocking.
Liquid metal thermal grease unlike the normal thermal grease it contains electrical conductivity and causes aluminum cooler to rust therefore please avoid using it. Corrosion and short circuits caused by using aluminum cooler are users' responsibility, so please read this carefully before using. (EX: Liquid Pro, Liquid Ultra etcs)