Thermaltake Pacific M360 Plus D5 Liquid CPU Cooler PN CL-W218-CU00SW-A - Computer Alliance
AJAX Loading

Thermaltake Pacific M360 Plus D5 Liquid CPU Cooler PN CL-W218-CU00SW-A

Web ID: 23969

Supporting Thermaltakes patented TT RGB PLUS Software, the Pacific M360 Plus D5 Hard Tube Water Cooling Kit is an efficient, yet quality liquid cooling solution for all watercooled gaming systems. Inside you will find a W4 Plus CPU waterblock, PR22-D5 Plus pump/reservoir combo, RL360 Plus radiator, C1000 Pure Clear coolant, 3 Riing Plus 12 RGB fans, 8 C-Pro compression fittings, 2 adapter fittings, 4 PETG hard tubes and other accessories. ONLY WHILE STOCKS LAST!
Manufacturer Warranty: 1 Year
Manufacturer PN: CL-W218-CU00SW-A
Manufacturer Website

$715 

Caution

Thermaltake recommends the following steps to be taken before using the Pacific series radiators and water blocks
  1. To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
  2. Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
  3. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
  4. Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.

Thermaltake recommends the following steps to be taken after completing your water loop setup
  1. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
  2. Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
  3. DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
  4. Fill the reservoir to the top as it will prevent air from going into the pump
  5. If necessary tilt the system slightly from side to side to bleed the air out of the loop.
  6. Place some paper towels under fittings and joining points to test for leaks.
  7. Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
  8. Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
  9. Coolant might fade over time.
P/N CL-W218-CU00SW-A
Dimension 523 (L) x 221 (W) x 280 (H)
Compatibility Intel LGA 2066/2011/1366/1156/1155/1151/1150/775
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2
(CPU Socket)
Components Dimension Pump & Reservoir:309.7H) x 87.4(W) x 94.1(L) mm
Radiator : 64 (H) x 129 (W) x 402.5 (L)
Tube Dimension OD : 16mm , ID : 12mm , L : 500mm
Fan Spec 1500 RPM (1000RPM with LNC)
Coolant Pure Clear Coolant
Kit Contents CPU Water Block
- Pacific Pacific W4 Plus x1

Pump/Reservoir
- Pacific PR22-D5 Plus Pump/Reservoir Combo x1

Radiator
- Pacific RL360 Plus Radiator 64 (H) x 129 (W) x 402.5 (L) mm x1

Fittings
- Pacific C-Pro G1/4 PETG 16mm OD Compression – Chrome x8
- Pacific G1/4 90 Degree Adapter - Chrome x2

Fan
-Riing 12 RGB Plus Radiator Fan TT Premium Edition 3 Pack x1

Coolant
- Thermaltake C1000 Pure Clear Coolant x1

Tube
- V-Tubler PETG Tube 16mm OD 500mm 4Pack x1

Accessory
- Silicone Insert 900mm Tt Premium Edition
- Intel and AMD Universal Backplated & Mounting Kit
- 24pin ATX Bridge Tool x1
- Thermaltake Thermal Grease x1

* Specifications are subject to change without notice.
* The product picture(s) is only for your reference, it may differ from the actual product.