AJAX Loading

StarTech USB 3.0 SATA SATDOCK2REU3 Hard Drive Duplicator & Eraser Dock - Standalone 2.5/3.5in HDD & SSD Eraser and Cloner

Web ID: 18807

Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB 3.0 for easy access - USB 3.0 SATA HDD/SSD Dock- 1:1 Duplicator ONLY WHILE STOCKS LAST!
Manufacturer Warranty: 1 Year
Manufacturer PN: SATDOCK2REU3
GTIN: 065030852654
Manufacturer Website

$156 

The SATDOCK2REU3 USB 3.0 Standalone Duplicator and Eraser Dock lets you connect your 2.5in/3.5in SATA HDDs or SSDs through SuperSpeed USB 3.0, with the ability to swap drives in and out as needed. The dock also functions as a standalone drive duplicator and eraser – an efficient and versatile solution for external drive management.

Featuring standalone Sector by Sector hard drive duplication with built-in LED progress bar, and support for 2 drive single pass over writing the SATDOCK22EU3 is a user-friendly all-in-one solution for any application requiring hard drive duplication or erasing.

With support for SATA I/II/III, and large capacity drives (tested up to 4TB) this HDD/SSD docking station is compatible with virtually any SATA hard drive, and greatly increases the storage/backup capabilities of your computer.

Extend the value of this hard drive docking station further with the addition of our SATA to IDE Hard Drive Adapter (SAT2IDEADP), allowing easy insertion of any 2.5 or 3.5in. IDE hard drive into a SATA hard drive dock.

The SATDOCK2REU3 is backed by a 2-year StarTech.com warranty and free lifetime technical support.

Connector(s)
Drive Connectors SATA Data & Power Combo (7+15 pin)
Host Connectors USB Type-B (9 pin) USB 3.0
Environmental
Humidity 5-90%
Operating Temperature 0?C to 85?C (32?F to 185?F)
Storage Temperature -10?C to 95?C (14?F to 203?F)
Hardware
Chipset ID Prolific - PL2775
Compatible Drive Types SATA
Drive Installation Removable
Drive Size 2.5in & 3.5in
Interface USB 3.0
Number of Drives 2
Indicators
LED Indicators HDD1 / 75%
  HDD2 / 100%
  Link / 25%
  Power / 50%
Packaging Information
Shipping (Package) Weight 710 g [25.1 oz]
Performance
Max Drive Capacity Currently tested with up to 4TB 7200 RPM 3.5" hard drives and 1TB 7200 RPM 2.5" hard drives
Type and Rate SATA II (3 Gbps)
  USB 3.0 - 5 Gbit/s
Physical Characteristics
Product Height 62 mm [2.4 in]
Product Length 128 mm [5 in]
Product Weight 610 g [21.5 oz]
Product Width 103 mm [4.1 in]
Power
Center Tip Polarity Positive
Input Current 1.2A
Input Voltage 110V-240V AC
Output Current 3000mA
Output Voltage 12 DC
Plug Type M
Power Consumption (In Watts) 36
Power Source AC Adapter Included
Software
OS Compatibility OS independent; No software or drivers required
Special Notes / Requirements
Note Destination drive must be the same size or larger than the source drive
What's in the Box
Included in Package HDD Dock
  Universal power adapter: comes ready for NA/EU/UK only when you buy in NA/EU/UK; comes ready for Australia and New Zealand only when you buy in Australia and New Zealand
  USB 3.0 Cable
  User Manual