CyberPower Online Series 10000VA/9000W Rack/Tower OL10000ERT3UP Online UPS - 2 yr advanced replacement warranty - Computer Alliance
AJAX Loading

CyberPower Online Series 10000VA/9000W Rack/Tower OL10000ERT3UP Online UPS - 2 yr advanced replacement warranty

Web ID: 14093

Online Double Conversion Topology, Detachable PDU, Economy Mode Setting, Smart Battery Management, Remote Management Capabilities ONLY WHILE STOCKS LAST!
Manufacturer Warranty: 2 Year
Manufacturer PN: OL10000ERT3UP
GTIN: 4712364142802
Manufacturer Website


The Online OL10000ERT3UP UPS with LCD readout and pure sine wave output safeguards mission-critical servers, telecom equipment, VoIP and internetworking hardware that requires seamless connection and advanced power protection. Its Double-Conversion topology is generator compatible and delivers consistent and having zero transfer time during power outages, protecting connected equipment and preventing costly business interruptions. This UPS is ENERGY STAR® qualified and the configurable Economy Mode Setting increases the UPS operating efficiency by up to 95% to save on energy costs by reducing energy consumption and waste heat generated. Smart Battery Management (SBM) charges batteries in several phases to reduce the deterioration of battery capacity hence improve battery life in the long run.

The LCD control panel provides 46  different settings for status and operation. Functions include menus for checking power status on (19) different parameters, (24) settings for setup, control and testing and (3) selections for event logging. With the optional DB26 cable, the LCD control panel can be removed from the UPS and relocated up to 10 feet away from the UPS for ease of use regardless of locations.

The OL10000ERT3UP comes with a capacity of 10000VA/9000Watts (0.9 high power factor) that can be configured for an output of 200V, 208V, 220V, 230V and 240V ± 2% for maximum flexibility under different application scenarios. The detachable PDU allows engineer to configure, repair or replace the UPS much easier without shutting down the connected servers. It has eight (8) IEC C13 receptacles, including six (6) for critical loads management, two (2) IEC C19, one (1) terminal block, and twenty (20) hot-swappable, user-replaceable 12V/9Ah batteries. The unit offers one (1) HID USB and one (1) Serial connectivity port with PC and one (1) Emergency Power Off (EPO) port. This model allows an addition of up to ten (10) BPE240V50ART3US external battery packs to increase the runtime of the unit. The battery packs are easy to plug-in and can be hot-swapped to maintain system uptime during normal UPS maintenance.

The OL10000ERT3UP features remote network management capabilities which include the PowerPanel® Business Edition software, an optional SNMP/ HTTP remote management card, and an optional ENVIROSENSOR. These management tools enable administrators to perform various operations including remote management, real-time monitoring, UPS configuration, and scheduled server/workstations shutdowns. All Smart App UPS systems and Remote Management Card have achieved the status of Cisco EnergyWise certified, better supporting other EnergyWise-enabled entities and be easily monitored and controlled to achieve the best energy performance under the EnergyWise operation framework.

For as long as you own this product, CyberPower will cover up to $100,000 of properly connected equipment if it’s ever damaged by a surge, including surges due to lightning strikes.


UPS Topology Double-Conversion
Energy Saving ECO Mode Efficiency >95%
Energy Star Qualified Yes
Active PFC Compatible Yes


Voltage 200 - 240Vac
Input Voltage Range 120Vac – 139Vac for 0 – 25% Load, 140Vac – 159Vac for 0 – 50% Load,160Vac – 179Vac for 0 – 75% Load,180Vac – 280Vac for 0 – 100% Load
Adjustable Voltage Range 120Vac - 280Vac
Input Frequency Range 50/60Hz ±10Hz (Auto-sensing)
Rated Input current 50
Input Power Factor 0.99
Cold Start Yes
Backfeed Protection Yes
Plug Type Terminal Block
Input Current (Amp) 50


VA 10000
Watts 9000
On Battery Waveform Sine Wave
On Battery Voltage 200, 208, 220, 230, 240Vac (Configurable) ±2%
On Battery Frequency 50/60Hz (auto-sensing or configurable) ± 0.25Hz
Overload Protection Line Mode: 105~125% Load for 1 min, 126~150% Load for 10 secBattery Mode: 105~130% Load for 10 sec, 131~150% Load for 2 sec
Outlets - Total 11
Outlet Type (2) IEC320 C19, (8) IEC320 C13, (1) Terminal Block
Outlets - Battery & Surge Protected 11
Outlets - Critical Load 6
Outlets - Non-Critical Load (NCL) 5
Rated Power Factor 0.9
Crest Factor 3:1
Harmonic Distortion THD < 3% at Linear Load, < 5% at Non-linear Load
ECO Mode Voltage Regulation ±10%, ±15% (Configurable)
Bypass Internal Bypass (Automatic and Manual)
Transfer Time 0ms


Runtime at Half Load (min) 12.5
Runtime at Full Load (min) 4.3
Battery Type Sealed Lead-Acid
Battery Size 12V/9AH
Battery Quantity 20
User Replaceable Yes
Hot-Swappable Yes
Typical Recharge Time 5 Hours
Smart Battery Management (SBM) Mode Yes
Extended Battery Module BPE240V50ART3US
Replacement Battery Pack RBP0072
Replacement Battery Pack Quantity 2

Surge Protection & Filtering

Surge Suppression 2,430 Joules
Phone / Network Protection RJ11/RJ45 1-In, 1-Out (Combo)
EMI/RFI Filtration Yes

Management & Communications

LCD Control Panel 24 different settings options via the UPS Configure menu
Multifunction LCD Diagnostic Display 22 different status options via the UPS Information menu and Event Log menus
Detachable LCD Control Panel Option Yes (Requires a separate DB26 Cable)
HID Compliant USB Port Yes
Serial Port Yes
Emergency Power Off (EPO) Port Yes
Dry Contacts Yes (Configurable, [I/P Power Fail] [Battery Low] [Summary Alarm] [UPS On Bypass] [UPS Fail])
Management Cable USB Cable, Serial Cable, Phone Cable
LED Indicators Power On (White), Line Mode (Green), Battery Mode (Yellow), Bypass Mode (Yellow), Fault (Red), Replace Battery (Red)
Audible Alarms Battery Mode, Battery Low, Overload, UPS Fault, Replace Battery
Software PowerPanel® Business Edition
SNMP / HTTP Remote Monitoring Yes, with optional RMCARD302 / RMCARD303


Form Factor Rack/Tower
Enclosure Construction Steel
Mounting Hardware Included

Physical - UPS Module

Dimensions (WxHxD) (mm.) 433 x 264 x 820
Weight (kg.) 106.5
Installed Rack Height 6U

Physical - Power Module

Dimensions (WxHxD) (mm.) 433 x 132 x 820
Weight (kg.) 28.5
Power Module Rack Height 3U

Physical - Battery Module

Dimensions (WxHxD) (mm.) 433 x 132 x 660
Weight (kg.) 78
Battery Module Rack Height 3U

UPS Module (Shipping Dimensions)

Dimensions (WxHxD) (mm.) 600 x 640 x 1115
Weight (kg.) 133


Operating Temperature 32 °F to 104 °F / 0 °C to 40 °C
Operating Humidity 0% - 90% non-condensing
Operating Elevation 0-10000 feet (0-3000 meters)
Storage Temperature 5 °F to 113°F / -15°C to 45 °C
Storage Relative Humidity 0% - 95% non-condensing
Storage Elevation 0-50000 feet (0-15000 meters)
Online Thermal Dissipation 3038 BTU/hr
Audible noise at 1.5M from surface of unit 65 dBA


Certifications CE, C-tick
RoHS RoHS Compliant


Product Warranty 2 Years Limited
Connected Equipment Guarantee Lifetime
CEG Amount 100000 AUD